Technical Services
Marine electrical, electronics and automation fault finding, repair, commissioning and retrofit support for commercial vessels and yachts, with emphasis on complex faults that cross control logic, electrical conditions, machinery state and vessel-data systems.
Areas of Technical Expertise
PLC, HMI, I/O, interlocks, feedback and vessel automation faults.
AC/DC distribution, generators, shore power, protection, insulation and load-related electrical faults.
Gyro and heading signals, AIS/radar interfaces, autopilot data, navigation sensors and bridge-data faults.
CPP pitch, clutch, engine-room controls, feedback signals, electrohydraulic outputs and machinery-state faults.
Voltage, load, harmonics, imbalance, insulation and intermittent trip diagnostics.
NMEA 0183, NMEA 2000, CAN, converters, gateways and vessel-data communication faults.
Legacy control-system fault isolation, interface mapping, replacement planning and staged retrofit support.
Signal, alarm, feedback, interlock and operating-sequence verification after repairs or modifications.
System-level diagnostic process
- Reproduce or define the fault condition and the machinery state in which it appears.
- Verify the intended command, signal and feedback sequence.
- Compare actual system behaviour with the expected response.
- Rule out healthy sections of the electrical, control or data path before replacing parts.
- Repair, hand off or recommend the correct next technical action, then verify the system in operation.
Need help with a vessel fault?
For planned troubleshooting, commissioning or retrofit work, send the vessel, system involved, current symptom, location and sailing deadline. Include photos, alarms or drawings where available. For an urgent operational fault, use the Call, WhatsApp or Viber actions in the header.
Ventus Electronic Services
Marine Electrical · Electronics · Automation
+30 698 040 0805 · info@ventus-services.gr
© 2026 Ventus Electronic Services